TM 5-3805-296-23-5
0370
REMOVAL CONTINUED
5. Remove seal (Figure 3, Item 1) from tire wheel assembly (Figure 3, Item 3). Discard seal.
WARNING
Wear eye protection when removing bearing races. Hammer and punch use may result in
projectiles. Failure to follow this warning may result in injury to personnel.
6. Using race punch, remove inner bearing race (Figure 3, Item 2) from tire wheel assembly (Figure 3, Item 3).
7. Using race punch, remove outer bearing race (Figure 3, Item 4) from tire wheel assembly (Figure 3, Item 3).
Figure 3. Bearing Races.
0370
END OF TASK
CLEANING AND INSPECTION
000370
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
