TM 5-3805-296-23-5
0366
REMOVAL
000366
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
CAUTION
Plug and cap all air lines and fittings to prevent contamination. Failure to follow this
caution may result in equipment damage.
NOTE
Tag and mark wiring harness connectors to aid with installation.
1. Remove tiedown strap (Figure 1, Item 3) from scraper park brake pressure switch (Figure 1, Item 2)
and scraper park brake pressure switch harness (Figure 1, Item 4). Discard tiedown strap.
2. Disconnect scraper park brake pressure switch harness connector (Figure 1, Item 6) from push frame wiring
harness connector (Figure 1, Item 1).
3. Remove scraper park brake pressure switch (Figure 1, Item 2) from fitting (Figure 1, Item 5).
Figure 1. Scraper Park Brake Pressure Switch.
0366
END OF TASK
CLEANING AND INSPECTION
000366
1. Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
2. Clean and inspect all components IAW Electrical General Maintenance Instructions (WP 0540).
END OF TASK