TM 5-3805-296-23-5
0362
REMOVAL
000362
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Tag and mark wiring harness connectors to aid in installation.
Note position of tiedown strap to aid in installation.
1. Disconnect main cab wiring harness connector (Figure 1, Item 1) from stop lamp switch connector
(Figure 1, Item 2).
2. Remove tiedown strap (Figure 1, Item 9) from tractor service brake pressure switch (Figure 1, Item 6), scraper
service brake pressure switch (Figure 1, Item 7), and main cab wiring harness (Figure 1, Item 8). Discard
tiedown strap.
3. Disconnect main cab wiring harness connector (Figure 1, Item 11) from scraper service brake pressure switch
connector (Figure 1, Item 10).
4. Remove scraper service brake pressure switch connector (Figure 1, Item 10) from retainer clip
(Figure 1, Item 4).
5. Disconnect main cab wiring harness connector (Figure 1, Item 3) from tractor service brake pressure switch
connector (Figure 1, Item 5).
6. Remove tractor service brake pressure switch connector (Figure 1, Item 5) from retainer clip (Figure 1, Item 4).
0362-2
