TM 5-3805-296-23-5
0352
REMOVAL CONTINUED
NOTE
Seal is part of rear blackout lamp and cannot be replaced separately. If seal is worn or
damaged, replace rear blackout lamp.
7. Remove six screws (Figure 6, Item 3) and rear blackout lamp (Figure 6, Item 2) from rear blackout lamp
housing (Figure 6, Item 1).
Figure 6. Rear Blackout Lamp.
0352
END OF TASK
CLEANING AND INSPECTION
000352
1. Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
2. Clean and inspect all components IAW Electrical General Maintenance Instructions (WP 0540).
END OF TASK
INSTALLATION
000352
NOTE
This procedure is for right rear blackout lamp. Follow same steps for left rear blackout
lamp.
Seal is part of rear blackout lamp and not replaced separately. If seal is worn or damaged,
replace blackout lamp.
1. Install rear blackout lamp (Figure 6, Item 2) and six screws (Figure 6, Item 3) on rear blackout lamp
housing (Figure 6, Item 1).