TM 5-3805-296-23-5
0342
REMOVAL CONTINUED
NOTE
Note location of P-clamps to aid in installation.
Note routing and location of air hoses to aid in installation.
15. Remove seven P-clamps (Figure 9, Item 3) from air hoses (Figure 9, Item 1).
16. Remove air hoses from access opening (Figure 9, Item 2) and machine.
Figure 9. Left Brake Actuator Hoses.
0342
END OF TASK
CLEANING AND INSPECTION
000342
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000342
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Install P-clamps as noted during removal.
Install air hoses as noted during removal.
1. Position air hoses in access opening (Figure 9, Item 2) and on machine.
2. Install seven P-clamps (Figure 9, Item 3) on air hoses (Figure 9, Item 1).