TM 5-3805-296-23-5
0330
REMOVAL CONTINUED
6. For right front brake actuator removal, repeat steps 3 through 5.
WARNING
The front brake actuator is under extreme spring tension. Do not disassembly front brake
actuator band clamp. Failure to follow this warning may result in injury or death to
personnel.
NOTE
Note position and orientation of fittings to aid in installation.
7. Remove fitting (Figure 3, Item 3) and fitting (Figure 3, Item 2) from front brake actuator (Figure 3, Item 1).
Figure 3. Fittings.
0330
END OF TASK
CLEANING AND INSPECTION
000330
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000330
NOTE
The following steps install left front brake actuator. Repeat these steps for right front brake
actuator.
Position and orientate fitting as noted during removal.
1. Install fitting (Figure 3, Item 2) and fitting (Figure 3, Item 3) on front brake actuator (Figure 3, Item 1).