TM 5-3805-296-23-5
0327
INSTALLATION CONTINUED
NOTE
Remove all plugs and caps from hydraulic hoses, lines, and fittings.
Install hydraulic hoses as noted during removal.
14. Position hose (Figure 16, Item 3) on machine.
15. Install new O-ring (Figure 16, Item 1), hose (Figure 16, Item 3), two flange halves (Figure 16, Item 2), four
washers (Figure 16, Item 9), and bolts (Figure 16, Item 8) on pump (Figure 16, Item 7).
16. Install new O-ring (Figure 16, Item 5) and hose (Figure 16, Item 3), and tighten tube nut (Figure 16, Item 4) on
fitting (Figure 16, Item 6).
Figure 16. Hydraulic Hose.
0327
END OF TASK
FOLLOW-ON TASKS
000327
1. Fill hydraulic oil (WP 0325).
2. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
