TM 5-3805-296-23-5
0301
INSTALLATION CONTINUED
NOTE
Remove plugs or caps from hydraulic hose and fitting.
Install hydraulic hose as tagged and marked during removal.
Install P-clamp as noted during removal.
5. Install P-clamp (Figure 15, Item 7) on hydraulic hose (Figure 15, Item 8).
6. Loosely install P-clamp (Figure 15, Item 7), washer (Figure 15, Item 1), and bolt (Figure 15, Item 2) on
machine.
7. Install new O-ring (Figure 15, Item 5) and hydraulic hose (Figure 15, Item 3) on elbow fitting (Figure 15,
Item 6). Do not tighten tube nut (Figure 15, Item 4) at this time.
Figure 15. Hydraulic Hose, P-Clamp, and Fitting.
0301