TM 5-3805-296-23-5
0301
CLEANING AND INSPECTION
000301
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000301
NOTE
Remove plugs or caps from hydraulic hose and fitting.
Install hydraulic hose as tagged and marked during removal.
1. With assistance, position hydraulic hose (Figure 13, Item 4) on machine.
2. Install new O-ring (Figure 13, Item 2) and hydraulic hose (Figure 13, Item 4) on elbow fitting (Figure 13,
Item 1). Do not tighten tube nut (Figure 13, Item 3) at this time.
NOTE
Remove plugs or caps from hydraulic hose and fitting.
Install hydraulic hose as tagged and marked during removal.
3. Position hydraulic hose (Figure 14, Item 2) on machine.
4. Install new O-ring (Figure 14, Item 4) and hydraulic hose (Figure 14, Item 2) on elbow fitting (Figure 14,
Item 3). Do not tighten tube nut (Figure 14, Item 1) at this time.
Figure 14. Hydraulic Hose and Fitting.
0301