TM 5-3805-296-23-5
0293
DRAINING CONTINUED
6. Remove O-ring (Figure 2, Item 2) from drain plug (Figure 2, Item 1). Discard O-ring.
Figure 2. Drain Plug.
0293
7. Remove flat washer (Figure 3, Item 1) from fill plug (Figure 3, Item 2). Discard flat washer.
Figure 3. Fill Plug.
0293
END OF TASK
CLEANING AND INSPECTION
000293
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
FILLING
000293
1. Lubricate new O-ring (Figure 2, Item 2) with final drive fluid before installation.
2. Install new O-ring (Figure 2, Item 2) on drain plug (Figure 2, Item 1).