TM 5-3805-296-23-4
0289
REMOVAL CONTINUED
7. Remove O-ring (Figure 3, Item 2) from converter oil temperature sensor (Figure 3, Item 1). Discard O-ring.
8. Remove O-ring (Figure 3, Item 3) from converter oil temperature sensor adapter (Figure 3, Item 4). Discard
O-ring.
9. Remove drain pan from under machine.
Figure 3. Converter Oil Temperature Sensor.
0289
END OF TASK
CLEANING AND INSPECTION
000289
1. Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
2. Clean and inspect all components IAW Electrical General Maintenance Instructions (WP 0540).
END OF TASK
INSTALLATION
000289
1. Install new O-ring (Figure 3, Item 2) on converter oil temperature sensor (Figure 3, Item 1).
2. Install new O-ring (Figure 3, Item 3) on converter oil temperature sensor adapter (Figure 3, Item 4).