TM 5-3805-296-23-4
0280
CONTROL VALVE PILOT HOSES REMOVAL CONTINUED
CAUTION
Plug and cap all hydraulic hoses lines, and fittings to prevent contamination. Failure to
follow this caution may result in damage to equipment.
NOTE
Tag and mark hydraulic hoses to aid in installation.
Note routing and location of hydraulic hoses to aid in installation.
Note location of tiedown strap to aid in installation.
Note location of P-clamp to aid in installation.
33. Remove two bolts (Figure 11, Item 8), and washers (Figure 11, Item 7), clamp (Figure 11, Item 6), and P-clamp
(Figure 11, Item 1) from machine.
34. Remove grommet (Figure 11, Item 4) from two hoses (Figure 11, Items 2 and 3).
35. Remove tiedown strap (Figure 11, Item 3) from machine. Discard tiedown strap.
Figure 11. Rear Draft Frame Clamp.
0280