TM 5-3805-296-23-4
0279
MAIN CONTROL VALVE HOSES REMOVAL CONTINUED
7. Remove four bolts (Figure 3, Item 10), washers (Figure 3, Item 11), split flange halves (Figure 3, Item 9), and
rear main control valve hose (Figure 3, Item 8) from draft frame line (Figure 3, Item 1).
8. Remove O-ring (Figure 3, Item 12) from rear main control valve hose (Figure 3, Item 8). Discard O-ring.
NOTE
Note routing of rear main control valve hose to aid in installation.
9. Remove rear main control valve hose (Figure 3, Item 8) from machine.
10. Remove four bolts (Figure 3, Item 7), washers (Figure 3, Item 6), split flange halves (Figure 3, Item 4), and rear
main control valve hose (Figure 3, Item 5) from draft frame line (Figure 3, Item 2).
11. Remove O-ring (Figure 3, Item 3) from rear main control valve hose (Figure 3, Item 5). Discard O-ring.
NOTE
Note routing of rear main control valve hose to aid in installation.
12. Remove rear main control valve hose (Figure 3, Item 5) from machine.
Figure 3. Rear Main Control Valve Hoses.
0279
END OF TASK