TM 5-3805-296-23-4
0272
REMOVAL CONTINUED
28. Using assistance, remove eight bolts (Figure 12, Item 2), washers (Figure 12, Item 3), four flange halves
(Figure 12, Item 1), two lines (Figure 12, Item 6), and two O-rings (Figure 12, Item 5) from machine
(Figure 12, Item 4). Discard O-rings.
29. Using assistance, remove two lines (Figure 12, Item 6) from machine.
Figure 12. Tubes.
0272
END OF TASK
CLEANING AND INSPECTION
000272
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000272
NOTE
Remove plugs and caps from lines and fittings.
Install lines as noted during removal.
1. Using assistance, position two lines (Figure 12, Item 1) on machine.
2. Using assistance, install two new O-rings (Figure 12, Item 5), tubes (Figure 12, Item 6), four flange halves
(Figure 12, Item 1), eight washers (Figure 12, Item 3), and bolts (Figure 12, Item 2) on machine
(Figure 12, Item 4).