TM 5-3805-296-23-4
0264
INSTALLATION CONTINUED
NOTE
Install wiring harness as tagged and marked during removal.
Install wiring harness connectors as noted during removal.
Install new tiedown straps as noted during removal.
Install P-clamp as noted during removal.
46. Install secondary steering wiring harness (Figure 51, Item 2) and connect secondary steering wiring harness
connector (Figure 51, Item 13) on machine.
47. Install three new tiedown straps (Figure 51, Item 1) on ladder clips (Figure 51, Item 14).
48. Slide transmission wiring harness connector (Figure 51, Item 4) rearward and install on bracket.
49. Connect cushion hitch wiring harness (Figure 51, Item 3) on transmission wiring harness connector
(Figure 51, Item 4).
50. Install new tiedown strap (Figure 51, Item 5) on ladder clip (Figure 51, Item 6).
51. Install P-clamp (Figure 51, Item 7), washer (Figure 51, Item 8), and bolt (Figure 51, Item 9) on machine.
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
0264-54