TM 5-3805-296-23-4
0264
REMOVAL CONTINUED
WARNING
To prevent injury to personnel, wear protective eye covering and gloves.
Lubricating/hydraulic oils used in performance of maintenance can be very slippery.
Immediately wipe up any spills.
Failure to follow this warning may result in injury to personnel.
NOTE
Cap and plug all lines and fittings to prevent fluid loss.
Use a container to catch any fluid that may drain from hoses or system.
Dispose of fluid IAW local policy and ordinances. Ensure all spills are cleaned up.
3. Loosen two tube nuts (Figure 2, Item 2) and remove lines from suction hose (Figure 2, Item 3).
4. Remove two O-rings (Figure 2, Item 4) from suction hose (Figure 2, Item 3). Discard O-rings.
5. Loosen two clamps (Figure 2, Item 1) and remove suction hose (Figure 2, Item 3) from machine.
Figure 2. Suction Hose.
0264