TM 5-3805-296-23-2
0150
Table 1. Front and Rear Turn Signals Do Not Operate Continued.
0150
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Front and Rear Turn Signals
3. Remove transmission shifter from
Do Not Operate Continued
machine (WP 0502).
4. Disconnect terminal CG-T8
(Figure 2, Item 3) from flasher
(Figure 2, Item 1).
5. Turn battery disconnect switch to
ON position (TM 5-3805-296-10).
6. Turn mode switch on military light
switch to SER. DRIVE position
(TM 5-3805-296-10).
Voltage 18 to 28 V Proceed to Test
7. Using digital multimeter
Step 5.
(WP 0540), test for voltage
Voltage Less Than 18 V Replace
between terminal CG-T8
fuse panel wire harness (WP 0515).
(Figure 2, Item 3) and ground.
Proceed to Test Step 9.
Figure 2. Flasher and Wiring Harness.
0150
Test Step 5. Test for Faulty Flasher.
1. Turn mode switch on military light
switch to OFF position
(TM 5-3805-296-10).
2. Turn battery disconnect switch to
OFF position (TM 5-3805-296-10).