TM 5-3805-296-23-2
0136
Table 1. One or Both Blackout Tail Lights Do Not Operate Continued.
0136
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Remove two tiedown straps
One or Both Blackout Tail
(Figure 2, Item 1) from wiring
Lights Do Not Operate
harness (Figure 2, Item 3) and rear
Continued
blackout lamp housing
(Figure 2, Item 2). Discard tiedown
straps.
Figure 2. Tiedown Straps.
0136
5. Disconnect connector AH-C13
(WP 0012, Figure 188) from
connector GND
(WP 0012, Figure 183).
6. Disconnect connector AH-C11
(WP 0012, Figure 186) from
connector 24
(WP 0012, Figure 183).
7. Turn battery disconnect switch to
ON position (TM 5-3805-296-10).
8. Turn mode switch on military light
switch to B.O. MARKER position
(TM 5-3805-296-10).
9. Using digital multimeter
Voltage 18 to 26 V Replace left rear
(WP 0540), test for voltage
blackout lamp (WP 0352).
between connector AH-C11
Proceed to Test Step 20.
(WP 0012, Figure 186) and
Voltage Less Than 18 V Proceed to
connector AH-C13
Test Step 5.
(WP 0012, Figure 188).