TM 5-3805-296-23-2
0133
Table 1. A/C Does Not Blow Cold When Maximum Cool Setting Is Selected Continued.
0133
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Using digital multimeter
A/C Does Not Blow Cold
Voltage 18 to 28 V Proceed to Test
(WP 0540), test for voltage
When Maximum Cool
Step 18.
between connector CL-C7
Setting Is Selected
Voltage Less Than 18 V Proceed to
terminal 4 and terminal 2
Continued
Test Step 26.
(WP 0012, Figure 51).
Test Step 13. Test for Open Heat A/C
Switch.
1. Turn fan speed switch to position
O (TM 5-3805-296-10).
2. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
3. Remove four bolts
(Figure 1, Item 2) and plate
(Figure 1, Item 1) from headliner
(Figure 1, Item 3).
Figure 1. Plate and Retaining Hardware.
0133