TM 5-3805-296-23-2
0117
Table 1. Steering System Does Not Operate Properly Continued.
0117
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 8. Inspect Steering Column
Steering System Does Not
and Shaft.
Operate Properly
1. Remove two screws
Continued
(Figure 4, Item 2) and steering
column cover (Figure 4, Item 1)
from machine.
2. Inspect steering column
Steering Column and Shaft are OK
Proceed to Test Step 9.
(Figure 4, Item 3) and steering
Steering Column and/or Shaft are
shaft (Figure 4, Item 4) for signs of
Damaged or Obstructed Remove
binding, damage or obstruction.
obstruction or replace steering column
(WP 0524).
Proceed to Test Step 13.
Figure 4. Steering Column.
0117
Test Step 9. Test Steering Main Relief
Valve.
Perform Steering Main Relief Valve
Valve Required Adjustment
Test and Adjust (WP 0175).
Proceed to Test Step 13.
Relief Pressure is Less Then
2,175 psi (14,980 kPa) Replace
hydraulic and steering pump
(WP 0393).
Proceed to Test Step 13.
Difference in Steering Pump
Pressures is Greater Than 50 psi
(350 kPa) Replace steering control
valve (WP 0297).
Proceed to Test Step 13.
