TM 5-3805-296-23-2
0114
Table 1. Service or Parking Brakes Do Not Release Correctly Continued.
0114
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Service or Parking Brakes
Do Not Release Correctly -
Valved nipple 6V-3966, Adapter 5P4674, Adapter 5P4675, and quick
Continued
disconnect hose 177-7861 are from Gauge, Pressure Kit 1U-5482.
4. Install valved nipple
(Figure 12, Item 6) on adapter
(Figure 12, Item 3).
5. Install adapter (Figure 12, Item 3)
on adapter (Figure 12, Item 2).
6. Install adapter (Figure 12, Item 2)
on fitting (Figure 12, Item 1).
7. Connect quick disconnect hose
(Figure 12, Item 4) on valved
nipple (Figure 12, Item 6).
8. Position gauge (Figure 12, Item 5)
where it can be easily read while
operating parking brake.
9. Turn battery disconnect switch to
ON position and start engine. Idle
engine for 20 minutes or until air
pressure gauge reaches normal
operating pressure
(TM 5-3805-296-10).
10. Set park brake switch to
engage (brake on) position
and read pressure gauge
(Figure 12, Item 5). Set park brake
switch to disengage (brake off)
position (TM 5-3805-296-10).
Record reading as control
pressure.
0114-20