TM 5-3805-296-23-2
0110
Table 1. Machine Turns When Differential Lock Is Engaged Continued.
0110
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 9. Test Voltage to Right
Machine Turns When
Differential Lock Switch.
Differential Lock Is Engaged
Voltage 18 to 25 V Replace main cab
Using digital multimeter (WP 0540),
Continued
wiring harness (WP 0505).
test for voltage between connector
Proceed to Test Step 19.
W-C11 terminal 1 (WP 0012,
Voltage Less Than 18 V Proceed to
Figure 69) and ground.
Test Step 10.
Test Step 10. Test for Open Fuse F33.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove fuse F33 from circuit
breaker panel
(TM 5-3805-296-10).
3. Using digital multimeter
Continuity Proceed to Test Step 11.
(WP 0540), test for continuity
No Continuity Discard fuse F33.
between terminals of fuse F33.
Proceed to Test Step 13.
0110-12