TM 5-3805-296-23-2
0092
Table 1. 1841 Scraper Parking Brake Pressure Switch Diagnostic Codes Continued.
092
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 13. Verify Malfunction is
1841-03 Scraper Park Brake
Resolved.
Pressure Switch Voltage
1. Ensure all harness connectors are
Above Normal Continued
connected.
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
3. At MSD, check for active
1841-3 Scraper Park Brake Pressure
diagnostic codes (WP 0008).
Switch Voltage Above Normal
Becomes Inactive Proceed to step 4.
1841-3 Scraper Park Brake Pressure
Switch Voltage Above Normal
Remains Active Repeat
troubleshooting from the beginning.
4. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
5. If removed, install splash shield
(Figure 2, Item 4), four bushings
(Figure 2, Item 3), washers
(Figure 2, Item 2), and bolts
(Figure 2, Item 1) on machine.
Figure 2. Splash Shield and Retaining Hardware.
0092
6. If lowered, install left frame access
plate (WP 0376).
7. Troubleshooting complete.
