TM 5-3805-296-23-2
0090
Table 1. 1775 Implement Pump Pressure Calibration Switch Diagnostic Codes Continued.
090
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 5. Verify Malfunction is
1775-04 Implement Pump
Resolved.
Pressure Calibration Switch
1. Ensure all harness connectors are
Voltage Below Normal
connected.
Continued
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
3. At MSD, check for active
1775-4 Implement Pump Pressure
Calibration Switch Voltage Below
diagnostic codes (WP 0008).
Normal Becomes Inactive
Troubleshooting complete.
1775-4 Implement Pump Pressure
Calibration Switch Voltage Below
Normal Remains Active Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0090-10
