TM 5-3805-296-23-2
0076
Table 1. 1281 Bowl Control Position Sensor Diagnostic Codes Continued.
076
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
4. Turn battery disconnect switch to
1281-08 Bowl Lever Position
ON position and start engine
Sensor Abnormal Signal
(TM 5-3805-296-10). Operate
Continued
Joystick (bowl control) through
full range of motion
(TM 5-3805-296-10).
5. At MSD, check for active
1281-8 Bowl Lever Position Sensor
Abnormal Signal Becomes Inactive
diagnostic code 1281-8 Bowl
Lever Position Sensor Abnormal
Troubleshooting complete. Proceed to
Signal (WP 0008).
step 6.
1281-8 Bowl Lever Position Sensor
Abnormal Signal Remains Active
Replace implement control joystick
(WP 0503).
Proceed to Test Step 9.
6. Install right trim panels on ROPS
(WP 0494).
Test Step 9. Verify Malfunction is
Resolved.
1. Ensure all harness connectors are
connected.
2. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-296-10). Operate
joystick (bowl control) through full
range of motion
(TM 5-3805-296-10).
3. At MSD, check for active
1281-8 Bowl Lever Position Sensor
diagnostic codes (WP 0008).
Abnormal Signal Becomes Inactive
Proceed to step 4.
1281-8 Bowl Lever Position Sensor
Abnormal Signal Remains Active
Replace transmission/chassis ECM
(WP 0495).
Proceed to Test Step 11.
4. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
5. Install right trim panels on ROPS
(WP 0494).
6. Troubleshooting complete.
0076-14
