TM 5-3805-296-23-1
0040
Table 1. 1785 Intake Manifold Pressure Sensor Diagnostic Codes Continued.
040
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 4. Verify Malfunction is
1785-04 Intake Manifold
Resolved.
Pressure Sensor Voltage
1. Ensure all harness connectors are
Below Normal Continued
connected.
2. At MSD, check for active
1785-4 Intake Manifold Pressure
Sensor Voltage Below Normal
diagnostic codes (WP 0008).
Becomes Inactive Proceed to step 3.
1785-4 Intake Manifold Pressure
Sensor Voltage Below Normal
Remains Active Repeat
troubleshooting from the beginning.
3. If removed, install splash shield
(Figure 5, Item 4), four bushings
(Figure 5, Item 3), washers
(Figure 5, Item 2), and bolts
(Figure 5, Item 1) on machine.
Figure 5. Splash Shield and Retaining Hardware.
0040
4. If lowered, install left frame access
plate (WP 0376).
5. Troubleshooting complete.