TM 5-3805-296-23-1
0015
Table 1. 0003 Fuel Injector Diagnostic Codes Continued.
015
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test Basic Engine
0003-05 Cylinder #3 Injector
Wiring Harness for High Resistance
Current Below Normal
or Open.
Continued
NOTE
Do not remove jumper wire from terminal 3 and terminal 8 of connector
CM-C13 at this time.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Lower left frame access plate
(WP 0376).
3. Remove four bolts (Figure 4,
Item 2), washers (Figure 4,
Item 1), bushings (Figure 4,
Item 3), and splash shield
(Figure 4, Item 4) from machine.
Figure 4. Splash Shield and Retaining Hardware.
0015
