2
TM 5-3805-296-10
OPERATOR MAINTENANCE
-
DOME LAMP BULB REPLACEMENT
001
5
Removal, Installation
INITIAL SETUP
Equipment Condition
Materials/Parts
0
0
Rag, wiping (WP 0024, Item 20)
Machine parked (WP 0005)
0
0
Dome lamp bulb (1)
0
Estimated Time to Complete
0
References
0.2 Hr
0
0
0
REMOVAL
00015
1. Remove dome lamp cover (Figure 1, Item 1) from dome lamp (Figure 1, Item 2).
2. Remove dome lamp bulb (Figure 1, Item 3) by pushing in slightly and turning bulb to the left to disengage bulb
locking lugs. Pull bulb out of socket (Figure 1, Item 4). Discard bulb.
END OF TASK
INSTALLATION
00015
1. Install new dome lamp bulb (Figure 1, Item 3) in socket (Figure 1, Item 4), push in slightly, and turn bulb clock-
wise to the right to engage bulb locking lugs.
2. Install cover (Figure 1, Item 1) on dome lamp (Figure 1, Item 2).
3. Verify correct operation of dome lamp (Figure 1, Item 2) (WP 0004).
Figure 1. Dome Lamp Bulb Replacement.
0015
END OF TASK
END OF WORK PACKAGE
0015-1/(2 blank)