TM 5-3805-296-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) Continued.
ITEM TO BE
CHECKED OR
EQUIPMENT NOT
ITEM
MAN-
SERVICED
PROCEDURE
READY/AVAILABLE IF:
NO.
INTERVAL
HOURS
15
Before
.2
Hydraulic Tank
a. Visually check for damage
Class III leaks are
and Sight
or leaks.
evident.
Gauge
b. Perform cold check of
hydraulic oil level. Oil must be
visible in sight gauge.
c. If oil is not visible in sight
gauge, perform the following
steps:
1. Start engine and move
ejector forward (WP 0004 and
2. Ensure bowl is lowered
to the ground with slight
downward pressure
3. Shut down engine
4. Clean area around
hydraulic tank filler cap and
remove.
5. Add lubricating oil
through filler opening until
visible in sight gauge. Refer to
LO 5-3805-296-13 for proper
oil(s) based on outside
temperature.
0012-15
