TM
3-4240-309-20&P
2-16. HOUSING UNIT (CONT).
LOCATION
ITEM
ACTION
Housing Unit
Inlet
transition
1.
Set POWER switch on compartment control
module to OFF.
2.
Loosen hose clamps (2) on airduct hose (3).
Compress the airduct hose (3) until it can be
3.
removed from inlet collar (4) and inlet
transition (5).
4.
Loosen hose clamp (6) on exhaust sleeve (7).
5.
Loosen hose clamp (8) on inlet transition (5),
and carefully pull inlet transition (5) off of dust
collector (9).
Loosen protective cap hose clamp (10) and
6.
remove protective cap (11) from inlet
transition (5).
7.
Remove nut (12) and washer (13) from
screw (14).
Remove screw (14) from inlet transition (5),
8.
loop of nylon cable (15) with protective cap
(11), and washer (16).
NOTE
Retain screws, washers, and nts to use with
new inlet transition.
2-114
