SECTION III. UNIT MAINTENANCE
4-4.
REMOVE AND REPLACE TERMINAL LUG
Materials
Tools
Terminal Lug,
Wire cutters
SC-C-681607
Tool, Crimping
Remove.
Step 1. Disconnect terminal lug from ground stud and remove jumper cables.
Step 2. Using wire cutters, cut old terminal lug from cable.
Replace
Step 1. Place new terminal lug on cable.
Step 2. Using crimping tool, connect terminal lug to cable.
Step 3. Reconnect terminal lug to ground stud and replace jumper cables.
4-5. REMOVE AND REPLACE GROUND WIRE
Materials
Tools
Wire Assembly, 65 feet
Wrench, 7/16 inch
SC-C-681613
Tool, Crimping
Remove.
Step 1. Disconnect terminal lug from ground stud and remove jumper cables
Step 2. Remove and retain clamp.
Step 3. Pull old cable out.
Replace
Step 1. Using crimping tool, connect terminal lug to cable.
Step 2. Thread new cable through stakes.
Step 3. Replace clamp.
Step 4. Reconnect terminal lug to ground stud and replace jumper cables.
4-2
