TM 5-4930-244-14
g.
Crankcase Breather Assembly.
(1)
Removal. (Refer to Figure 5S-17).
(a)
Loosen hose clamp (1) and pull hose (2) from breather (3).
(b)
Remove screw (4), cover (5), flap (6), and preformed packing (7) from breather base (8).
(c)
Remove breather base (8), preformed packing (9), and washer (10) from crankcase mounting surface
(11)
(2)
Repair.
(a)
Inspect parts for damage. Replace as required.
(b)
Clean mounting surface (11)with rags.
(3)
Installation.
(a)
Install breather base (8), packing (9), and washer (10).
(b)
Install screw (4), cover (5), flap (6), and packing (7) to base (8).
(c)
Position hose (2) on breather (3), and tighten clamp (1).
5-46