TM 9-6230-210-13&P
LEGEND
9 BLACK WIRES
10 SCREW
11 NUTS
12 RED WIRES
13 NUTS
14 SCREWS
15 BATTERY
CHARGER
16 CONTROL BOX
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
q.
r.
s.
t.
u.
Tag two red wires and two black wires.
Loosen terminal screw (10) on terminal strip and remove black wires (9).
Remove two wire nuts (11 ) and remove red wires (12).
Remove two nuts (13) and sinews (14).
Remove battery charger(15) from control box (1 6).
Replace unserviceable battery charger with a serviceable item from stock.
Install batter charger (15) in control panel.
Install two sinews (14) and nuts (13) and tighten.
Connect two red wires (12) and install wire nuts (11). Remove tags.
Install two black wires (9) and tighten terminal screws (10). Remove tags.
Install positive battery cable (8) and wire nut (7).
Tighten screw (5) on ground bus (6).
Install control panel inner cover (4) on control panel and secure with assembled screw (3).
Install control panel outer cover (2) on control panel and scare with two assembled screws (1).
Install battery (para 4.23).
4-82
