WARNING
TM 9-6230-210-13&P
f. Position winch (11) in place.
NOTE
Flatwasher is installed on side of winch with one hole.
g. Install one flatwasher (10), three bobs (9), Iockwashers (8), and nuts (7).
Wrap end of cable with tape to seal any sharp ends. Serious injury could result.
h. Thread three wraps of cable (5) from underneath the drum (6).
i. Thread theme through the round hole until it extends 1-inch (2.54 cm) past the two square holes.
j. Secure cable (5) to outside of drum (6) by installing two bolts (4), Iockwashers (2), nuts (1), and one rope keeper
(3).
REPAIR
4-41
