WARNING
WARNING
LEGEND
29 NUT
30 WASHER
31 SCREW
32 HINGE HALF
33 HINGE HALF
34 BASE SECTION
35 PIVOT HINGE
36 HINGE PIN
o. Remove nut (29), washer (30), and capscrew (31).
p. Remove hinge halves (32 and 33) from base section (34).
q. Replace damaged tower sections or parts with a serviceable like item.
r. Place hinge halves (32 and 33) on hinge pin (36).
s. Secure, using capscrew (31), washer (30), and nut (29).
NOTE
Leave tower sections extended until cable is installed.
t. Inseet next-to-bottom section (28) into base section (25).
u. Install safety stop (24) using two hex head screws (23).
v. Insert next-to-top section (27) into next-to-bottom section (28).
w. Install safety stop (24) using two hex head screws (23).
x. Insert top section (26) into next-to-top section (27).
y. Install safety stop (24) using two hex head screws (23).
z. Install two T-bobs in top tower section.
Wear safety glasses when welding.
aa. Re-weld cable guide and bar (21) to base section (22).
ab. Spot paint disturbed areas.
Wear gloves when handling cable to avoid cuts from loose cable strands.
ac. Install cable (para 4.20).
TM 9-6230-210-13&P
4-33
