1
CUT
SCREW
440 NC2A
TAPPED
HOLE
6
.25 DIA
.25 DIA
TM 9-4940-568-34
C-10
C-11. SHUTTLE VALVE INSTALLATION/REMOVAL TOOL.
Fabricate threaded tip from 4-40NC-2A screw and handle from .25 in. (6.35 mm) steel rod.
a.
Using a hacksaw, cut head off of screw. File off rough edges.
b.
Using a hacksaw, cut steel rod to dimension shown.
c.
Drill and tap hole at end of steel rod as needed to match bolt threads.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well-ventilated area. If adhesive, solvent, or sealing compound gets
on skin or clothing, wash immediately with soap and water.
d.
Apply a thin bead of sealing compound (Item 29, Appendix B) to threads of one end of threaded tip and install
in steel rod.