TM 9-4940-568-34
6-13
NOTE
Install seal assemblies and ring as
noted prior to removal.
(11) Apply hydraulic oil to seal assemblies
(21) and ring (20) and install on piston
(22).
(12) Place cylinder barrel (17) in chain vise
with wooden blocks.
(13) Install cylinder rod (3) in cylinder barrel
(17).
(14) Turn cylinder head (19) on cylinder rod
(3) until setscrew holes are aligned.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(15) Apply sealing compound on threads of
setscrew (16).
(16) Install setscrew (16) in cylinder barrel
(17).
(17) Install wear ring (18) on cylinder barrel
(17).
