11
12
13
14
15
9
16
10
17
18
6
8
4
5
7
TM 9-4940-568-34
5-125
(33)
Install panel (18) and four screws (17) on
generator control housing (16).
NOTE
Pull wires through generator
control housing as noted in
removal and install wire ties
where needed.
(34)
Install insulator (15), ground wire (14),
washer (13), lockwasher (12) and screw
(11) on generator control housing (16).
(35)
Install three wires (9) on main circuit
breaker (10).
NOTE
Install wires as noted prior to
removal.
Starting fluid is toxic and highly
flammable. Container is
pressurized. NEVER heat
container and NEVER discharge
starting fluid in confined areas or
near open flame. Severe injury
to personnel may result.
(36) Install ether start aid assembly (6) on
generator panel (4) with two screws (7) and
nuts (8).
(37) Install ether supply cylinder (5) on ether
start aid assembly (6).
