19
21
20
22
18
17
TM 9-4940-568-20
9-25
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(3)
Apply sealing compound to threads of two hoses (19) and (20).
(4)
Install two hoses (19) and (20) on swivel assemblies (21) and (22), as noted during removal.
NOTE
Install cable ties as noted prior to removal.
(5)
Install two cable ties (18) on hoses (19) and (20).
Hose reel assembly is under
pressure. Avoid releasing latching
mechanism during removal and
installation. Failure to comply
could result in injury to personnel.
NOTE
Prior to output hose installation, it is
necessary to preload the hose reel
assembly. Perform the following
step to preload the hose reel
assembly.
(6)
Manually turn hose reel assembly (17) until spring
is tight, back off three turns, and then latch.
