6
4
7
2
5
3
1
3
8
12
2
9
10
11
13
8
12
2
9
10
11
13
TM 9-4940-568-20
8-40
8-14. FUEL TANK VENT REPLACEMENT (CONT).
(4)
Loosen hose clamp (8) and remove upper
vent hose (2) from check valve (9).
NOTE
Note position of check valve
prior to removal.
(5)
Loosen hose clamp (10) and (11) and
remove check valve (9) and lower vent hose
(12) from adapter (13).
b. Installation.
NOTE
Position check valve as noted
prior to removal.
(1)
Install lower vent hose (12) and check valve
(9) on adapter (13) and tighten hose clamps
(11) and (10).
(2)
Install upper vent hose (2) on check valve
(9) and tighten hose clamp (8).
(3)
Install rubber washer (6) and fuel tank vent
(3) on generator housing (7).
(4)
Install jam nut (4) and washer (5) on fuel
tank vent (3).
(5)
Install upper vent hose (2) on fuel tank vent
(3) and tighten hose clamp (1).
c.
Follow-On Maintenance:
Connect batteries, (TM 9-4940-568-10).
Install rear panel, (TM 9-4940-568-10).
END OF TASK
