TM 9-4940-568-20
7-18
7-6. HYDRAULIC RESERVOIR REPLACEMENT (CONT).
b. Installation.
Hydraulic reservoir and rack
weigh 272 lbs (124 kg). Attach
suitable lifting device and
properly support hydraulic
reservoir and rack to prevent
possible injury to personnel.
Clean area before removing any
hydraulic lines or fittings. After
removal, cap or plug all lines and
fittings to keep foreign materials
out of hydraulic system,
preventing damage to equipment.
(1)
Attach lifting device and with the aid of an
assistant, position hydraulic reservoir (4)
onto rack (16). Reuse two friction pads with
new reservoir.
(2)
Secure hydraulic reservoir (4) to rack (16)
with three retaining straps (31), washers
(33) and locknuts (32).
(3)
Install three socket-head screws (29) and
washers (30) on retaining straps (31).
(4)
Attach lifting device, raise hydraulic
reservoir (4) and rack (16) off of wooden
blocks and attach bolt (28), two washers
(27) and locknut (26) to hydraulic reservoir
and rack.
29
30
31
32
33
26
27
28
16
31
16
4
FRICTION PADS
