TM 9-4940-568-20
5-16
5-4.
JUNCTION BOX MAINTENANCE (Continued)
(25) Remove green wire (66) from grounding
block (6).
(26) Remove black wire (67) from no. 5
position of terminal block (9).
(27) Remove two nuts (68), lockwashers
(69), washers (70), screws (71) and hour
meter (72) from junction box (12).
Discard lockwashers.
(28) Remove black wire (73) from grounding
block (6).
(29) Remove white wire (74) from no. 6
position, black wire (75) from no.1
position of terminal block (9), and white
wire (76) on center terminal of diode
(77) on inside of junction box (12).
(30) Remove locknut (55) and boom
light/power switch cables (78) from
junction box (12). Discard locknut.
(31) Remove white wire (79) from no. 18
position, black wire (80) from no. 6
position, and green wire (81) from no. 4
position of terminal block (9).
(32) Remove locknut (10) and resistor cable
(82) from junction box (12). Discard
locknut.
6
9
10
12
55
67
66
70
69
68
71
72
73
74
75
76
77
78
79
80
81
82
