TM 9-4940-568-20
3-28
3-7. ELECTRICAL PIPING AND CLAMPS REPLACEMENT (CONT).
b.
Repair.
NOTE
Removed components and fixtures are to be replaced with like components and fixtures.
Female couplers are to be used for mating old and new sections of conduit or fixtures.
(1)
Cut out conduit section or fixture needing replacing on conduit assembly.
(2)
Apply primer on all surface areas to be connected together.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well-ventilated area. If adhesive, solvent, or sealing compound
gets on skin or clothing, wash immediately with soap and water.
(3)
Apply adhesive to all primed surface areas to be connected.
(4)
Assemble conduit section and/or fixture to conduit assembly.
