EMERGENCY
STOP
TM 9-4940-568-20
2-126
Table 2-21. Crane Troubleshooting (CONT).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. REMOTE CONTROL DOES NOT OPERATE (CONT).
Test 5.
Place EMERGENCY STOP switch in ON position. Check for 24 volts at terminal of
wire 8A of EMERGENCY STOP switch.
If 24 volts are not present, EMERGENCY STOP switch is faulty. Refer to
paragraph 5-12 in this manual.
If problem remains, Notify Supervisor.
END OF TEST
