TM 9-2330-389-14&P
Section III. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Paragraph Title
Paragraph No.
Page No.
General ...................................................................................................... 4-7 ............................................ 4-3
Service Intervals .......................................................................................... 4-8............................................. 4-3
Reporting Repairs ....................................................................................... 4-9............................................. 4-3
General PMCS Procedures ......................................................................... 4-10 .......................................... 4-3
Specific PMCS Procedures .......................................................................... 4-11 .......................................... 4-4
Unit Preventive Maintenance Checks and Services (PMCS) .......................... Table 4-1 .................................. 4-5
4-7.
GENERAL.
To ensure that the Tracked Cargo Trailer is ready for operation at all times, it must be inspected systematically so that
defects can be detected and corrected before they result in serious damage or failure. Table 4-1 contains a tabulated
listing of Preventive Maintenance Checks and Services (PMCS) to be performed by unit maintenance personnel.
4-8.
SERVICE INTERVALS.
Perform PMCS, found in Table 4-1, at the following intervals:
(1)
Perform Semiannual (S) PMCS once every six months.
(2)
Perform Annual (A) PMCS once each year.
4-9.
REPORTING REPAIRS.
Report all defects and corrective actions on DA Form 2404. If a serious problem is found, report it to your supervisor
immediately.
4-10.
GENERAL PMCS PROCEDURES.
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point is 100° F-138° F (38°C-59° C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts eyes, immediately wash your eyes and get medical aid.
4-3
