TM 9-2330-359-14&P
4-52. LANDING LEG REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Install shoe (26) on landing leg (1) with pin (27).
2.
Install washer (28) and hanger (29) on landing leg
(1) with screw (23) and nut (30).
3.
Install landing leg (1) on mounting bracket (22)
with screws (21), new Iockwashers (24), and nuts
(25).
4.
Install crank (9) on landing leg (1) with washer (8), screw (7’), washer (10), and nut (11).
5.
Install cross-brace (16) and brace (17) on landing legs (1) with screws (18), new Iockwashers (12), and nuts (13).
6.
Install brace (20) on landing leg (1) with screw (19), new Iockwasher (14), and nut (15).
7.
Install shaft (4) on landing leg (1) with two screws (2), washers (3 and 5), and nuts (6).
Page 4-100 is rescinded.
TA706583
Change 2
4-99/(4-100 Blank)
