TM 9-2330-324-14&P
0062
00-6
RPSTL INTRODUCTION
0062
00
PART NUMBER Column. Indicates the P/N assigned to the item.
FIG. Column. This column lists the number of the figure where the item is identified/located in the repair
parts list and special tools list work packages.
ITEM Column. The item number is the number assigned to the item as it appears in the figure referenced
in the adjacent figure number column.
SPECIAL INFORMATION
UOC. The UOC appears in the lower left corner of the Description Column heading. Useable on codes are
shown as “UOC: …” in the Description Column (justified left) on the first line under the applicable
item/nomenclature. Uncoded items are applicable to all models. Identification of the UOCs used in the
RPSTL are:
C o d e
Used
O n
717
M105A3
Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material
functional group of this RPSTL. Part numbers for bulk materials are also referenced in the Description
Column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions
for items source coded to be manufactured or fabricated are found in Appendix (x) of this manual.
Index Numbers. Items which have the word BULK in the figure column will have an index number shown
in the item number column. This index number is a cross-reference between the NSN / P/N index work
packages and the bulk material list in the repair parts list work package.
HOW TO LOCATE REPAIR PARTS
1. When NSNs or P/Ns Are Not Known.
First. Using the table of contents, determine the assembly group to which the item belongs. This is
necessary since figures are prepared for assembly groups and subassembly groups, and lists are divided
into the same groups.
Second. Find the figure covering the functional group or the subfunctional group to which the item
belongs.
Third. Identify the item on the figure and note the number(s).
Fourth. Look in the repair parts list work packages for the figure and item numbers. The NSNs and part
numbers are on the same line as the associated item numbers.
2. When NSN Is Known.
First. If you have the NSN, look in the STOCK NUMBER column NSN index work package. The NSN is
arranged in NIIN sequence. Note the figure and item number next to the NSN.
Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
