TM 9-2330-324-14&P
0033
00-2
SERVICE BRAKE ASSEMBLY MAINTENANCE—Continued
0033
00
DISASSEMBLY—Continued
N O T E
If replacing brakeshoes (8 and 17) only, perform steps 1 through 5.
1.
Remove two springs (1) from pins (6, 18, 23, and 29).
2.
Disconnect handbrake cable (24) from brake lever (5).
3.
Remove two slotted washers (2), flatwashers (3), spring washers (4), brake lever (5), and link (7) from
pins (6 and 23).
4.
Remove screw (30), lockwasher (31), flatwasher (32), sleeve (33), and brakeshoe (8) from backing
plate (11). Discard lockwasher.
5.
Remove nut (20), lockwasher (19), flatwasher (21), sleeve (22), bolt (14), and brakeshoe (17) from
backing plate (11). Discard lockwasher.
6.
Remove 12 nuts (15), lockwashers (16), bolts (26), cable ramp (25), two supports (12), and backing
plate (11) from axle (13). Discard lockwashers.
7.
Remove brake adjusting screw (28) and slack adjusting wheel (27) from each support (12).
8.
Remove four nuts (10) and lockwashers (9) from pins (6, 18, 23, and 29). Remove pins from
brakeshoes (8 and 17). Discard lockwashers.
7
6
8
910
30
3132
33
29
1
28
27
26
25
12
12
11
13
14
15
16
24
2019
18
17
22
21
23
1
4
23
5
