TM 9-2330-324-14&P
0022
00-3
ORGANIZATIONAL PREVENTIVE MAINTENANCE
0022
00
CHECKS AND SERVICES (PMCS)Continued
Table 1. Organizational PMCS.
ITEM
N O .
INTERVAL
ITEM TO BE
INSPECTED
PROCEDURE
N O T E
Perform Operator/Crew PMCS (WP 0017 00) prior to, or in conjunction
with, Organizational PMCS if there is a delay between the daily
operation of the equipment and the Organizational PMCS, or if the
regular operator is not assisting/participating.
1
Semiannual
Brake Actuator
Master Cylinder
Check fluid level. Fill to 3/4 full (WP 0023 00).
2
Semiannual
Wheels and
Tires
a.
Inspect tires (including spare) for wear and damage.
Check tread depth (TM 9-2610-200-24).
b.
Check wheel nuts for tightness. Torque nuts to 385 lb-ft
(522 Nm) (WP 0020 00).
3
Semiannual
Landing Gear
Inspect for bent or broken components (WP 0043 00).
4
Semiannual
Brakes
a.
Clean, inspect, and repair or replace internal brake parts
as required (WP 0033 00).
b.
Clean out dirt, mud, and foreign material inside brake
actuator casing.
c.
Adjust brakes (WP 0033 00).
d.
Check handbrake adjustment. Adjust as required (WP
0032 00).
e.
If possible, perform road test of trailer. Observe trailer for
unusual or excessive noises that may indicate damage,
looseness, defects, and deficient lubrication. Make
several stops and observe for side pull, noise, chatter, or
other unusual conditions.
Inspect and repair brakes as required.
5
Semiannual
Suspension
a.
Inspect springs for bent or cracked leaves, loose
mounting, and worn components (WP 0044 00).
b.
Check axle U-bolt nuts for 223 lb-ft (302 Nm) torque.