TM 9-2330-324-14&P
0021
00-1
SERVICE UPON RECEIPT
0021
00
THIS WP COVERS:
Inspection, Servicing
INITIAL SETUP:
Maintenance Level
Materials/Parts
Organizational
Fluid, Brake (Item 4, WP 0060 00)
Rags, Wiping (Item 9, WP 0060 00)
References
Solvent, Cleaning (Item 10, WP 0060 00)
WP 0017 00
WP 0018 00
WP 0022 00
WP 0023 00
GENERAL
When a new, used, or reconditioned trailer is first received, determine whether it has been properly
prepared for service and is in condition to perform its mission. Follow the inspection instructions and
servicing instructions specified below.
INSPECTION INSTRUCTIONS
1.
Read and follow all instructions on DD Form 1397 attached to conspicuous part of trailer.
2.
Remove all straps, plywood, tape, seals, and wrappings.
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful t o
skin and clothing. To avoid injury or death, keep away from open fire and
use in a well-ventilated area. If solvent gets on skin or clothing, wash
immediately with soap and water.
3.
Remove rust-preventive compound from coated exterior parts of trailer using cleaning solvent and
rags.
4.
Inspect trailer for damaged incurred during shipment. Also check to see if equipment has been
modified.
5.
Check equipment against packing list to ensure that shipment is complete. Report any
discrepancies in accordance with instructions in DA PAM 738-750.
SERVICING INSTRUCTIONS
1.
Perform all Operator/Crew and Organizational Preventive Maintenance Checks and Services
(PMCS) (WPs 0017 00 and 0022 00). Schedule next PMCS on DD Form 314.
2.
Lubricate all lubrication points as described in Operator/Crew and Organizational lubrication charts
(WPs 0018 00 and 0023 00) regardless of interval.
